PELCO片碳導電片，雙麵塗層 16084 峰源隆國際貿易（上海）有限公司

產品詳情

所在位置: 首頁> 產品目錄> 美國電鏡耗材總目錄> Adhesives 膠粘劑粘合劑>

查看大圖

產品名稱：PELCO片碳導電片，雙麵塗層
產品型號：16084
產品廠商：其它品牌
產品文檔：

你添加了1件商品查看購物車

簡單介紹：

PELCO Tabs™ Carbon Conductive Tabs, Double Coated new types added The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared 新增類型與SEM安裝中使用的許多其他常見粘合劑相比，PELCO Tabs™碳導電片的應用簡單和光滑乾淨的表麵是一項重大改進。兩側翼片都有厚厚的導電粘合劑（導電內片為35μm，兩側粘合劑為45μm，總厚度為125μm[5密耳]），兩側各有一個襯墊，分彆為透明襯墊和白色襯墊。

詳情介紹：

PELCO Tabs™ Carbon Conductive Tabs, Double Coated

new types added
The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible.

Application of the tab to a mount or surface should be done slowly and carefully to maintain surface smoothness.

The conductive adhesive is a carbon filled acrylic, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol, alcohols or our 3M™ Adhesive Remover 80924 which is solvent-free. Temperature maximum is 60°C (140°F). Small impurities of Si, Sb, S and very small impurities of Fe, Mg and Na can be found.

This product may also be used for gunshot residue analysis.
Many laboratories use these tabs for SEM in a large diversity of applications. Refrigeration will increase shelf life but a warm up period of one hour is then required before use.
(Use Spectro Tabs where a purer composition is required.)