產品名稱：PELCO Tabs Carbon Conductive Tabs, Double Coated 雙麵碳導電膠墊

PELCO Tabs™ Carbon Conductive Tabs, Double Coated

雙麵碳導電膠墊 雙麵碳導電膠片 雙麵碳導電試片座 高純碳導電膠片

與其他應用於掃描電鏡固定樣品的普通粘合劑相比，PELCO碳導電膠片操作的簡易性、表麵的平滑光潔都有了很明顯的提高。膠墊的兩麵都具有厚的導電粘附層（內側的導電層厚度35um，兩麵的粘附層厚度45um，加起來總厚度為125um【5密位】）並附有襯墊，分彆為透明和白色。雙麵碳導電膠墊可以立即使用。頂部保護性的襯墊在準備好固定樣品之前不需要去掉。避免了可能的汙染。脫氣可以忽略不計。

new types added
 

The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible.

Application of the tab to a mount or surface should be done slowly and carefully to maintain surface smoothness.

The conductive adhesive is a carbon filled acrylic, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol, alcohols or our 3M™ Adhesive Remover 80924 which is solvent-free. Temperature maximum is 60°C (140°F). Small impurities of Si, Sb, S and very small impurities of Fe, Mg and Na can be found.
This product may also be used for gunshot residue analysis.
Many laboratories use these tabs for SEM in a large diversity of applications. Refrigeration will increase shelf life but a warm up period of one hour is then required before use.
(Use Spectro Tabs where a purer composition is required.)