產品名稱：Glue Gun 粘合劑噴槍

Glue Gun
粘合劑噴槍

熱熔膠槍

粘合劑噴槍為某些特定的粘合需求提供實用的幫助。

熱塑性膠棍通過噴槍型的設計來融化並且付諸應用。舉個例子，對於掃描電鏡標本台，用膠帶或者圓盤粘附劑固定的較重或者較大的樣品在研究觀察時可能會移動，而如果用噴槍的話可以將標本更加牢固的固定在標本台上。表麵噴碳的標本和粘合劑會允許形成一個放電通路。較低的溫度範圍（100° to 120°C / 212°- 248°F）是更加適合的，比如我們的16068型，可以避免高溫可能對熱敏感標本造成的損壞。（高溫粘合劑噴槍的正常標準溫度是在190° to 210°C / 374° to 410°F一個範圍）。膠凝固非常快，因此在用時應迅速固定好標本的位置。如果需要重新更換位置，可以用噴槍將粘合膠軟化。多孔標本如果覺得放電通路過於薄弱可以在標本表麵覆蓋粘合劑以減少該狀況。顆粒標本可以撒到硬化粘合劑表麵。

A thermoplastic glue stick is used with a gun-type design to melt the glue and allow its application, for example, to an SEM specimen mount. Heavier and/or larger specimens, which might move during study when held with a tape or disc adhesive, will hold firmly in place when this type of adhesive is used to "seat" the specimen. Carbon coating the specimen and the adhesive will permit an electrical discharge path. A lower temperature range (100° to 120°C / 212°- 248°F) is preferable, such as our model 16068 to avoid possible damage to heat sensitive specimens. (Normal temperature for standard high temperature glue guns is in the 190° to 210°C / 374° to 410°F range). The glue hardens quickly so the specimen should be positioned promptly upon glue application. If re-positioning is required, the glue may be softened with the Glue Gun.
Porous specimens such as felt with a poor discharge path may accept a track of glue over its surface to reduce such static. Granular specimens may be sprinkled onto the hardening surface. 
 

Prod #	Description	Unit

16068

Glue Gun, Low Temperature

each

16068-2

Glue Sticks, Ø .437" x 4" L (Ø 11mm x 101.6mm L), Low Temperature

pkg/18

手動膠槍

噴膠槍

原裝進口膠槍