產品名稱：Tronex Fine Hard Wire Cutter 鉗子

Fine Hard Wire Cutter – Oval Class T – Model 5112T

Tronex Model Number: 5112T

Description: Oval Head T Fine Hard Wire Cutters

Handle Length: Standard (short)

Head Shape: Taper Head

Cutting Edge: Flush

Material: Carbon Steel precision blanks with solid tungsten carbide material silver brazed into the cutting edges

Finish: Polished with gold screw

Cutting Capacity (steel wire):

.008″-.025″

.2mm – .65mm

32-22 AWG

Features:

Made from Carbon Steel with solid Tungsten Carbide material silver brazed into the cutter jaw.

Designed with it’s dual material construction combines the high yield strength of carbon steel with intense localized hardness of Tungsten Carbide.

Hardness of 79 to 81 HRC on both cutting edges.

Used for cutting fine hard wire such as Nitinol and Stainless Steel.

T cutters can cut thicker and harder wire than Tronex W cutters.

The handles and jaws of Class T cutters are tougher than Class W cutters.

Tronex型號：5112T
描述：橢圓形頭T細硬線切割機
手柄長度：標準（短）
頭形：錐頭
前沿：齊平
材料：碳鋼精密毛坯，采用實心碳化鎢材料釺焊到切削刃中
表麵處理：用金螺絲拋光
切割能力（鋼絲）：
0.008“ - 025”
.2mm  -  .65mm
32-22 AWG
特征：
由碳鋼製成，用硬質碳化鎢材料銀釺焊到切割鉗口。
采用雙材料結構設計，結合了碳鋼的高屈服強度和碳化鎢的強烈局部硬度。
兩個切削刃的硬度為79至81 HRC。
用於切割鎳鈦合金和不鏽鋼等精細硬線。
T型切割機可以切割比Tronex W切割機更厚更硬的線材。
T級切割機的手柄和鉗口比W級切割機更堅固。