產品名稱：Hamilton進樣器選型指導

固定針頭，針頭固定在玻璃內，基部與零刻度位置對齊
For low volume syringes The needles are cemented into the glass syringe barrel at a point corresponding to the zero graduation mark. With this termination, dead volume is limited to the internal volume of the needle. Not autoclavable. Needle gauge is determined by the syringe volume and are not user-selectable.

SN, Special Cemented Needle

For low volume syringes The special needle terminations are the same as the Cemented Needle terminations except they allow for a variety of user-defined gauges, lengths, and point styles to be attached.

          LTN, Luer Tip Cemented Needle

針頭被粘合在玻璃內，基部與零刻度位置對齊

 For mid volume syringes The needles are cemented into the glass  syringe barrel at a point corresponding to the zero graduation mark. With this termination, dead volume is limited to the internal volume of the needle. Not autoclavable. Needle gauge is determined by the syringe volume and are not user-selectable

LTSN, Luer Tip Special Cemented Needle

For mid volume syringes The special needle terminations are the same as the Luer Tip Cemented Needle terminations except they allow for a variety of user-defined gauges, lengths, and point styles to be attached.

LT, Luer Tip

突出的Tip頭可以接皮下注射針頭、Kel-F hub針頭以及其他連接裝置。
The needles are removable and fit over a ground glass hub which is tapered in the shape of a male luer. The LT termination will accept most hypodermic needles but was designed specifically for use with Hamilton Kel-F needles. This termination increases the dead volume in the syringe, which may not be appropriate for some applications. Autoclavable when disassembled.

RN, Removable Needle

可換針頭底座螺母使針頭基部與零刻度對齊,高溫高壓下讀數將產生偏差，可換成其他型號的同種規格尺寸的針頭。
The needles are removable and are a Hamilton-specific design. The design allows the needles to seat precisely at the zero graduation mark of the syringe. Users can select the needle gauge, length, and point style to optimize the syringe for custom applications. Additionally, this termination allows for a removable needle without increasing the dead volume of the syringe and is ideal when there is a risk of the needle clogging. Autoclavable when disassembled. Repeated autoclaving will shorten syringe life.

KH, Knurled Hub

可換針頭，專用於7000係列注射器，高溫高壓下讀數將產生偏差，進樣時*高承受6000psi的壓力，前端的附加套件可以使每次進樣的深度保持一致
The knurled hub is used exclusively on 7000 Series syringes. The hub handles up to 6000 psig maximum injection pressure. The needle is removable but with a limited number of gauges available because the plunger is fitted inside the needle. Autoclavable when disassembled. Repeated autoclaving will shorten syringe life.

TLL, PTFE® Luer Lock

鍍鎳的黃酮Luer鎖，不能高溫**。用於Hamilton公司稀釋配液儀和眾多生化儀。
This termination has a PTFE, male Luer taper with nickelplated brass locking hub for use with Kel-F needles, metal hub needles, and universal connectors. Also, the TLL is used with Hamilton diluters/dispensers, OEM applications, and manual operations. Autoclavable when disassembled, except on 25 mL and greater syringes. Repeated autoclaving will shorten syringe life.

SL, SampleLock™

可換針頭配以樣品鎖，能在高溫高壓下使用，用於頂空、環境樣品的采集與儲存，常態下氣體樣品的GC分析。
The sample lock incorporates an On/Off syringe valve with RN needle. This termination is used for headspace, environmental sample collection and storage, pre-pressurization of gaseous samples for GC analysis, and sample spiking. Not autoclavable.

    CA,Carbon Analyzer