產品詳情
查看大圖

  • 產品名稱：ProtoGel Quick-Cast 12% ProtoGel 速製蛋白凝膠（12%）

  • 產品型號：EC-895
  • 產品廠商：其它品牌
  • 產品文檔：
你添加了1件商品 查看購物車
簡單介紹：
ProtoGel Quick-Cast 12% ProtoGelTM 速製蛋白凝膠（12%）
詳情介紹：

 

ProtoGel Quick-Cast 12%

ProtoGelTM 液態預製蛋白凝膠（12%）


  • Cast a Gel in One Fourth the Time
     
  • Eliminates Mixing and Measuring
     
  • Ideal for Western Blotting Applications
     
  • Precast Convenience without the Precast Price


        Catalog Number:EC-895

  • 美國National Diagnosis 研製的12%液態預製蛋白凝膠是市場的**個也是唯壹的液態預製膠產品。

    1.一瓶液態預製膠搞定配膠，一次成型，不需兩次倒膠

    2.為蛋白印跡實驗節省時間，同時提高實驗重複性

    3.非預製的價格提供預製的便捷

    4.穩定性好，4度保質期達兩年

    12%預製蛋白凝膠溶液可以使製膠時間從2小時縮短至25分鐘, 使製膠步驟減少並縮短製膠的時間。隻需要簡單的量取所需的體積, 加入起始劑，及可倒膠。一次成型， 不需要多步的量取和混合,也不需要在之後製備濃縮膠. 電泳緩衝液和蛋白染色均與普通的蛋白凝膠電泳相同.密閉避光可在4攝氏度保存2年.

     

    With the introduction of ProtoGel Quick-Cast, the time required for casting gels for protein separation has been reduced from 2 hours to under 25 minutes, and the number of steps involved has been cut from 10 to only 3. With ProtoGel Quick-Cast, simply measure out the amount needed, add initiators and cast the gel. No mixing, no multiple measurements, no need for a second casting to produce a stacking gel.

    ProtoGel Quick-Cast gels are run in standard 1X Tris-Glycine SDS. Electrical parameters will vary from apparatus to apparatus, but typically gels are run at 170V for 60 minutes.

    ProtoGel Quick-Cast gels require no special handling after the run.Simply stain according to standard protocols.

    Storage: ProtoGel Quick-Cast is stable for 24 months when stored tightly capped in the refrigerator (40C).


滬公網安備 31010902002433號