產品名稱：208C高真空渦輪碳塗層機

Main Features of the 208C

1. Voltage controlled rod source gives multiple evaporation capabilities
2. Feedback loop enables precise and consistent coating thickness
3. Choice of operation methods for optimized operation
4. Automatic evaporation control gives ease of use in busy environments
5. Low cost, high resolution thickness monitor ensures reproducible results
6. 80 ltr/sec turbo pump on a 150mm diameter chamber gives rapid pumpdown
7. Optional Dry Scroll Pump available
8. Reduces operating cost in several ways:      
9. No need for water cooling
10. No need for warm up or cool down
11. No need for LN2 (dry nitrogen gas optional)
12. Short cycle time
13. Space saving, compact bench top design

     Carbon Evaporation Supply

    The 208C uses a unique fully integrated electronic feedback-controlled power design for the rod fed Bradley type carbon evaporation source. Current and voltage are monitored by sensor wires in the evaporation head where the evaporation source is part of the feedback loop. This feature gives the conventional rod fed carbon source unusual stability and reproducibility. The carbon source uses two-step ultra pure carbon rods. The evaporation source can be operated in manual "pulse" or manual "continuous" modes. The pulsed mode, when used in conjunction with the optional MTM-10 high resolution thickness monitor, gives absolute control over the desired thickness of the carbon coating. The automatic mode lets the user set the voltage and time, which together with the two-step rods gives consistent coating combined with ease of operation.

    208C Specimen Chamber and Optional Special Stages

    The modular design of this practical-size chamber accepts a range of attachments, which can be readily implemented. The telescopic pillar gives a simple, rapid adjustment from long to short working distances to change the evaporation rate. The unique standard HIGH-VAC / LOW-VAC pressure adjustment system utilizes a precision needle valve. HIGH-VAC is used for highest quality carbon films such as for TEM applications. LOW-VAC is used for Glow Discharge cleaning of TEM grids or for carbon coating of highly topographic SEM specimens. For SEM, EDS/WDS and microprobe analysis applications, the Rotary-Planetary-Tilting stage with variable speed, adjustable tilt and 4 specimen holders ensures uniform coating on multiple samples. The Rotary-Tilting stage is specifically designed for TEM and analytical applications and holds either 25 x 75mm (1" x 3") glass slide, 7 standard 12.7mm pin stubs or 3 sample holders. Both stages are mounted on a mounting collar and can be readily implemented in the chamber.
     

    208C Optional Accessories

    The modular design of the 208C permits easy addition of optional coating accessories often used in EM labs such as metal evaporation, glow discharge and aperture cleaning devices. The accessories are all driven from the sophisticated 208 Auxiliary Power Unit. The accessories are connected to the APU by means of a "smart" cable. The APU detects the device and enables the controls accordingly for ease of operation. The APU contains a digital timer and digital HT/LT controls for the accessories. The 208C and all accessories have integrated vacuum safety switches so that the unit can only be used under vacuum.

    Prod #	Description	Unit

    9620

    208C High Vacuum Turbo Carbon Coater, 115V*

    each

    9620-220

    208C High Vacuum Turbo Carbon Coater, 220V*

    each

    9624

    208C High Vacuum Turbo Carbon Coater, Dry Pumping System, 115V, 50/60Hz

    each

    9624-220

    208C High Vacuum Turbo Carbon Coater, Dry Pumping System, 220V, 50/60Hz

    each

    Options and Accessories for 208C
    9640	Auxiliary Power Supply for Accessories, 115V	each

    9640-220

    Auxiliary Power Supply for Accessories, 220V

    each

    9650

    Metal Evaporation Accessory (requires 9640 or 9640-220)

    each

    9650 includes: Mounting flange, vacuum safety switch, manual shutter and filaments.
    9625	Glow Discharge Accessory, (requires 9640 or 9640-220)	each

    9625 includes: Accessory top-plate with HT feedthrough, vacuum safety switch, cathode and sample table.
    9626	Aperture Cleaning Accessory (requires 9640 or 9640-220)	each

    9626 includes: Accessory top-plate with LT feedthrough, vacuum safety switch, boat holder with clamps.
    The High Vacuum Turbo Coater includes: Microprocessor based, feedback controlled power supply with vacuum safety interlock; Automatic and manual evaporation control; Digital timer/voltage setting display; Analog vacuum and Amps display; Fully integrated all-metal vacuum pumping system with 80 l/sec. turbo pump on ISO 63 flange and a 2 cu. m/hr. rotary pump, mounted on an anti-vibration table, stainless steel flexible vacuum hose and QF16 connection system; High/low vacuum metering system; Precision needle valve with switched “no leak” mode; Glass chambers: 150mm dia. x 150mm H and 150mm dia. x 65mm H; Telescoping top plate support; Rapid source offset adjustment; 10 preshaped carbon rods; Operation manual.