产品名称：Coverslip Kits Coverslip套件

Coverslip Kits
Perfect for:
Amniocentesis
Cytogenetic Procedures
Chorionic Villus Sampling (CVS)

• Ready to use. Pre-sterilized (Gamma Irradiation).

Researchers and clinicians with a limited number of cells have always preferred to use coverslips to initiate cell proliferation. The typical procedure involved first sterilizing all items and then placing the coverslips in a 35 mm petri dish, all time consuming steps. Now MatTek Cell Culture Coverslip Kits come ready to use - coverslips placed in 35 mm petri dishes and pre-sterilized.

Ready To Use

MatTek Coverslip Kits are pre-sterilized using gamma-irradiation. No more "flaming" the coverslips plus the certainty of gamma-irradiation all but eliminates the need to "redo" patient tests. You simply open the sterile sleeve package of 20 dishes and perform the test.

Two Coverslip Surfaces

Two coverslip surface chemistries (standard glass and CS1) are available. This gives the end-user the option of selecting the most appropriate growth surface for their application-- the standard glass coverslip or MatTek's special modified CS1 surface.

Standard glass coverslip kits are available in the CSGK/F, CSGK/C and CSGK/N Coverslip Kit configurations. These kits, the CSGK/F in particular, are widely used in amniocentesis testing.

CS1 coverslips have an oxygen rich, negatively charged surface. These coverslips are available in only one kit configuration, CS1K/F.

Convenient Size

MatTek coverslips are 22 mm square and are 0.16-0.19 mm thick (standard No. 1.5 coverslip thickness). Their thickness makes them ideal for optical microscopy (Note: The CS1 coverslips cannot be used with oil immersion objectives). The CS1 coverslips are manufactured from a non-curling plastic material to improve their durability.

MatTek Coverslip Kits come cases of 500 dishes packaged in pre-sterilized sealed sleeves of 20 dishes each.Convenient Packaging

Coverslip Kit Ordering Information:

MatTek coverslip kits are available in the following styles.

适合：

羊膜穿刺术

细胞遗传学程序

绒毛膜绒毛取样（CVS）

• 可以用了。预**（伽玛射线照射）。

具有有限数量细胞的研究人员和临床医生总是倾向于使用盖玻片来启动细胞增殖。典型的程序包括首先对所有物品进行**，然后将盖玻片放在35毫米的培养皿中，这是耗时的步骤。现在，MatTek细胞培养Coverslip试剂盒随时可以使用 - 盖玻片放置在35 mm培养皿中并预先**。

可以用了

MatTek Coverslip试剂盒使用γ射线预**。盖玻片不再“燃烧”加上伽马辐射的确定性，但不需要“重做”患者测试。您只需打开20个盘子的无菌套管包并进行测试。

两个盖片表面

有两种盖玻片表面化学成分（标准玻璃和CS1）。这使*终用户可以选择*适合其应用的生长表面 - 标准玻璃盖玻片或MatTek特殊改良的CS1表面。

标准玻璃盖玻片套件有CSGK / F，CSGK / C和CSGK / N盖片套件配置。这些试剂盒，特别是CSGK / F，**用于羊膜穿刺试验。

CS1盖玻片具有富氧，带负电的表面。这些盖玻片仅提供一种套件配置，CS1K / F.

方便的尺寸

MatTek盖玻片为22平方毫米，厚度为0.16-0.19毫米（标准1.5号盖玻片厚度）。它们的厚度使其成为光学显微镜的理想选择（注意：CS1盖玻片不能与油浸物镜一起使用）。 CS1盖玻片由非卷曲塑料材料制成，以提高其耐用性。

MatTek Coverslip Kits套装包含500个餐具，每个餐具包装有预先**的密封套管，每套20个餐具。方便包装

Coverslip Kit订购信息：

MatTek盖玻片套件有以下几种款式。

Part No.	Type	Brand*	Case Qty	Sleeve Qty
CSGK/F	Glass Coverslips	Falcon dish	500	20
CSGKF-F	Glass Coverslips	Falcon dish	500	20
CSGK/N	Glass Coverslips	Nunc dish	500	20
CS1K/F	CS1 Plastic coverslips	Falcon dish	500	20

 

*Note about brands: Falcon, Corning and Nunc are trademarked names and remain the exclusive property of their respective owners.

Glass Coverslip Specifications

MatTek uses the highest quality, borosilicate German glass coverslips in its glass bottom dish products. The coverslip properties are as follows:

Highest hydrolytic resistance (hydrolytic class 1)
Excellent resistance to chemicals
Emission of alkali approximately 15 to 24 µg Na2O/g glass
Excellent properties for fluorescent microscopy: Incident ultraviolet rays with wavelengths longer than 320 nm do not cause fluorescence.
Mercury lines at 334 and 365 nm do not create auto-fluorescence. (Note: For mercury illumination, filter out the mercury lines with wavelengths shorter than 313 nm to obtain best possible results.)
Refractive index (@ 20°C): ?D = 1.5230 tolerance ± 0.0015
Abbe number V = 55

关于品牌的注意事项：Falcon，Corning和Nunc是**名称，仍然是其各自所有者的专有财产。

玻璃盖玻片规格

MatTek在其玻璃底盘产品中使用*高质量的硼硅酸盐德国玻璃盖玻片。 盖玻片属性如下：

*高的耐水解性（水解1级）

优异的耐化学品性

碱的排放量约为15至24微克Na2O / g玻璃

荧光显微镜的优异性能：波长*过320 nm的入射紫外线不会产生荧光。

334和365 nm处的汞线不会产生自发荧光。 （注意：对于水银照明，滤除波长小于313 nm的水银线，以获得*佳效果。）

折射率（@ 20℃）：ΔD= 1.5230公差±0.0015

阿贝数V = 55