产品名称：组织包埋-处理盒

Unisette™ Tissue Cassettes

Outside dimensions: 28.5 x 41 x 6.7mm
Inside dimensions: 26 x 30 x 5mm

Prod #	Color		Unit

27400-1A

white

box/500

27400-2A

pink

box/500

27400-3A

green

box/500

27400-5A

blue

box/500

Unisette™ Biopsy Cassettes

Specially made for biopsies.
 

Similar to Unisette™ Tissue Cassettes. Made of acetal polymer with 1mm openings assure maximum fluid exchange.

Dispenser box of 500.

Available in 7 non-cytotoxic, non-metallic colors.
Each case contains 3 dispenser boxes of 500 cassettes.

Outside dimensions: 28.5 x 41 x 6.7mm
Inside dimensions: 26 x 30 x 5mm

Biopsy Cassette Bottoms

made of acetal polymer (unless otherwise noted) for use with metal cover

Disposable plastic tissue cassettes are suitable for holding and identifying tissue samples in processing, embedding and sectioning procedures. The cassettes fit securely in microtome chuck adapters. They are molded from a high density polymer that is totally resistant to the chemical action of histological solvents (Exception: Prod. No. 27168-0, clear, which is made of polypropylene). The slanting writing surface accepts writing easily, permitting sample identification throughout all stages of embedding and long afterwards when archived. They are available in several colors. These cassettes are made to accept standard metal lids, Prod. No. 27167. Each case contains 3 dispenser boxes of 500 cassettes.

Metal Process Cover

Stainless Steel lid for use in place of the plastic lid on Series 27168 Cassettes.
Size: 28mm width (1.1"), 33.5mm length (1.35").

Cellsafe™ Biopsy Cassettes

The Cellsafe™ is designed to contain small tissue fragments and biopsies during tissue processing. The Cellsafe™ Biopsy Insert with a hinged cover fits into a regular cassette. Top and bottom consist of extra fine nylon mesh preventing small tissues from getting lost during specimen preparation, keeping them safe. The plastic frame and nylon mesh are suitable for use in common tissue processing reagents including Formaldehyde solutions, Bouin's Fluid, Alcohol solutions, Xylene, Chloroform, Citrus based clearing agents and Paraffin wax (melting point up to 65°C). The plastic frame is made from the same material widely used in the manufacture of plastic processing cassettes. If you are using any unusual reagents it is suggested that you carry out preliminary chemical compatibility tests before using the Cellsafe™ to contain tissue samples. The Cellsafe™ is designed for single use only.
Interior dimesions of a regular cassette are: 30 x 26 x 4.92mm H.
Exterior dimensions of the Cellsafe Biopsy Cassettes are: 27.5 x 25 x 4.57mm H.

Tissue Capsules

made of polypropylene
These capsules are suitable for holding tissue samples during processing. The lids have a frosted write-on area for sample identification and an open mesh area to facilitate fluid exchange. The whole surface of the base is also an open mesh. The lid snaps securely on the base, eliminating the risk of tissue loss during processing.

Biopsy Foam Pads

made of polyester urethane foam

Prevent tissues from being lost during processing. Made of cellular polyester urethane foam which is always verified for consistency throughout in order to achieve optimum solvent flow. Biopsy samples are sandwiched between two foam pads and are placed either in tissue capsules or cassettes with metal or plastic lids. Packed 1000 per bag.

Biopsy Bags

Embedding Rings

made of high-impact polystyrene

Embedding Rings are suitable for holding and identifying tissue sample blocks and fit well in microtome chuck adapters. The etched writing surface on the ring is marked with an identification number and placed on top of the sample block. Additional paraffin is poured into the base mold to cement the ring onto the tissue block. The embedding ring securely holds the tissue sample in the microtome chuck adapter for sectioning and then identifies the sample while in storage. Made of polystyrene. Packed in four dispenser boxes of 250.