产品名称：SynapTek网格

PELCO® SynapTek GridStick^™

staining and storage for EM

An inexpensive device to reduce or eliminate precipitate and dirt from your electron microscopy grids during staining.
The PELCO® SynapTek GridStick™ is manufactured from a thin but rigid alloy that does not react with commonly used organic solvents and stains. The stick is 4mm wide by 75mm long and has a slot along its center with small undercut notches on one side to make grid removal simple.
A small area on top of each stick is reserved for identification (use a fine point permanent ink pen).
The PELCO® SynapTek GridStick™ is coated with a specially formulated pressure-sensitive adhesive. This adhesive holds the grids in place during staining, emulsion coating, carbon coating, shadow casting and serial section collection.
The PELCO® SynapTek GridStick™ will fit into conventional Pasteur pipettes. The grids lie in the same plane as the solution flow, minimizing chances of breaking Formvar films and collecting surface debris.
The PELCO® SynapTek GridStick™ was developed in conjunction with PELCO® SynapTek™ Grids. Other grids may be used provided they have sufficient thickness to avoid bending when being removed from the adhesive on the PELCO® SynapTek GridStick™. PELCO® SynapTek™ Grids are 100µm thick.

Prod #	Description	Unit

155

PELCO® Synaptek GridStick™ Kit

each

SynapTek™ Replacement Components
155-5	PELCO® Synaptek GridSticks™ (uncoated)	pkg/10

155-7

Staining Pipettes with 2 flow limiting plugs

pkg/20

GridStick™ Adhesive

Prod #	Description	Unit

155-9

GridStick™ Adhesive, 5ml

each