产品名称：针，镐，探针，操纵器

Long, Stainless Steel, Microscopic Needle Holder

1350-5

Long Microscopic Needle Holder

each

Micro PicksStainless Steel, for dissecting, manipulating, or holding small tissues or objects, wooden handle, needle diameter 0.63mm (.025").

Prod #	Description	Unit

13531

Micro Pick, angled, 19.0cm L

each

13532

Micro Pick, straight 18.4cm L

each

Micro ProbesProbing, picking, poking or moving; set of 4 probes with very fine flexible tips. Made of stainless steel, tempered spring wire. Set of 4 comes in vinyl pouch. Probes and pouch may be ordered separately.

Prod #	Description	Unit

13550

Micro Probes, set of 4, with pouch

each

13551

Probe, straight needle, 14cm (5-1/2")

each

13552

Probe, hook curve, 14cm (5-1/2")

each

13553

Probe, bent needle, 14cm (5-1/2")

each

13554

Probe, large curve, 14cm (5-1/2")

each

13550-P

Probe Pouch only

each

Micro EyelashA carefully selected No. 1 Superfine Eyelash is attached to a fine wooden handle for delicate manipulation of ultra-thin sections in the knife boat of an ultramicrotome or wherever delicate teasing or manipulation is required. These special eyelashes are chosen due to their taper and strength and make an excellent addition to your dissection tools.

Prod #	Description	Unit

113

No. 1 Superfine Eyelash

each

Ultrafine Single Deer Hair

Selected, single deer hair brush for manipulating thin sections on water or separating small particles using a microscope. The ultrafine deer hair is attached to a 6-1/4" (159mm) long wooden handle.

Prod #	Description	Unit

119

Ultrafine, single Deer Hair with handle

each

Pin Vise and Micro NeedlesThis quality pin vise, with a wide choice of micro needles, is ideally suited for probing, picking, scribing, cleaning, marking and similar fine work. There is a wide choice of fine pointed needles for different grades of precision work.

• Straight stainless steel needles with 0.25, 0.40 and 0.55 mm diameter
• Angled stainless steel needle with 0.25, 0.40 and 0.55 mm diameter
• Very fine and straight short micro needle with a 0.1mm diameter
• Sharp carbon tool steel needle (nickel plated) with a diameter of 0.35mm.

  The stainless steel micro needles are more flexible and suitable for probing, picking and sorting. They are also more chemically resistant. The carbon steel needle is stiffer and harder and more suitable for marking, scribing and cleaning applications.
  The Precision Pin Vise has a knurled brass handle for a firm grip and a precision carbon steel collet for holding the needles. 80mm (3-1/8") long. The maximum needle diameter capacity for the pin vise is 0.70mm ( 0.028").
  
  

  Prod #	Description	Unit

  13560

  Pin Vise w/o needles, 80mm (3-1/8") long

  each

  Micro Needles for Pin Vise

  Prod #	Description	Unit

  Stainless Steel Micro Needles
  13561-10	Straight Stainless Steel Needles 0.25mm diameter, 36mm long	pkg/10

  13561-20

  Straight Stainless Steel Needles 0.40mm diameter, 36mm long

  pkg/10

  13561-30

  Straight Stainless Steel Needles 0.55mm diameter, 36mm long

  pkg/10

  13561-50

  Straight Stainless Steel Needles 0.1mm diameter, 12mm long

  pkg/10

  13562-10

  Angled Stainless Steel Needles 0.25mm diameter, 36mm long

  pkg/10

  13562-20

  Angled Stainless Steel Needles 0.40mm diameter, 36mm long

  pkg/10

  13562-30

  Angled Stainless Steel Needles 0.55mm diameter, 36mm long

  pkg/10

  Carbon Steel Micro Needles
  13565-10	Straight Sharp Carbon Tool Steel Needles 0.35mm diameter, 30mm long, Nickel Plated	pkg/10

  Pin Vise #13560 complete with a pack of 10 Straight Stainless Steel Micro Needles (#13561-10), 0.25mm diameter.

  Prod #	Description	Unit

  13561

  Pin Vise with 10 Straight, Stainless Steel Needles

  each

  Pin Vise with Angled Stainless Steel Needles
  Pin Vise #13560 complete with a pack of 10 Angled Stainless Steel Micro Needles (#13562-10), 0.25mm diameter.
  

  Prod #	Description	Unit

  13562

  Pin Vise with 10 Angled, Stainless Steel Needles

  each

  Pin Vise with Straight, Sharp Carbon Steel Needles
  Pin Vise #13560 complete with a pack of 10 Straight, Sharp Carbon Steel (nickel plated) Micro Needles (#13565-10), 0.35mm diameter.
  

  Prod #	Description	Unit

  13565

  Pin Vise with 10 Straight, Sharp Carbon Steel (nickel plated) Needles

  each

  Ultrafine Tungsten Manipulator Probe
  The Ultrafine Tungsten Manipulator Probe consists of a fine tungsten needle with 0.6um radius in a quality precision pin vise. The ultrafine point is ideally suitable for probing and manipulating very small particles or feature under a microscope. The tungsten needle has a diameter of 0.52mm (0.020"), a length of 25mm (1") and a sharp tip radius of 0.6µm. The precision pin vise has knurled brass handle for a firm grip and a precision carbon steel collet for holding the tungsten probe. 80mm (3-1/8") long. The maximum probe diameter for the pin vise is 0.70mm (0.028"). The sharp tungsten needle can also be used in other needle holders or for custom made probing systems.

  Prod #	Description	Unit

  13570

  Ultrafine Tungsten Manipulator Probe

  each

  13570-10

  Replacement Tungsten probe, 0.6µm/25mm L

  each