PELCO片碳导电片，双面涂层 16084 桑戈国际贸易（上海）有限公司

产品详情

所在位置: 首页> 产品目录> 美国电镜耗材总目录> Adhesives 胶粘剂粘合剂>

查看大图

产品名称：PELCO片碳导电片，双面涂层
产品型号：16084
产品厂商：其它品牌
产品文档：

你添加了1件商品查看购物车

简单介绍：

PELCO Tabs™ Carbon Conductive Tabs, Double Coated new types added The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared 新增类型与SEM安装中使用的许多其他常见粘合剂相比，PELCO Tabs™碳导电片的应用简单和光滑干净的表面是一项重大改进。两侧翼片都有厚厚的导电粘合剂（导电内片为35μm，两侧粘合剂为45μm，总厚度为125μm[5密耳]），两侧各有一个衬垫，分别为透明衬垫和白色衬垫。

详情介绍：

PELCO Tabs™ Carbon Conductive Tabs, Double Coated

new types added
The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible.

Application of the tab to a mount or surface should be done slowly and carefully to maintain surface smoothness.

The conductive adhesive is a carbon filled acrylic, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol, alcohols or our 3M™ Adhesive Remover 80924 which is solvent-free. Temperature maximum is 60°C (140°F). Small impurities of Si, Sb, S and very small impurities of Fe, Mg and Na can be found.

This product may also be used for gunshot residue analysis.
Many laboratories use these tabs for SEM in a large diversity of applications. Refrigeration will increase shelf life but a warm up period of one hour is then required before use.
(Use Spectro Tabs where a purer composition is required.)