产品名称：Ion Gun 离子枪

A high frequency piezo AC power supply is located Inside of hand piece to maintain consistent ionization performance with longer hose lengths (standard 6 ft hose included) and eliminate the need for a remote console. The light weight of the viper ion gun (less than 0.5 lb) allows for comfortable extended use by operators. The viper ion gun is designed with slotted tips to meet the OSHA requirement for pressure relief. Normal power consumption is approximately 2.5W.

品牌名称：Desco
商品名称：Viper Ion Gun
简短说明：ION GUN，VIPER
UNSPSC：46182100
高频压电交流电源位于手持件内部，可在较长的软管长度（包括标准6英尺软管）内保持一致的电离性能，无需使用远程控制台。 viper离子枪的重量轻（小于0.5 lb）允许操作员舒适地长时间使用。 viper离子枪设计有开槽上端，以满足OSHA对压力释放的要求。 正常功耗约为2.5W。

Standards	ANSI/ESD S20.20, ESD TR53, OSHA Approved
Net Weight	0.4 lb

Voltage Rating	100 - 240VAC (Input), 24VDC (Output)
Frequency Rating	50/60 Hz

Includes

(1) 24VDC Power Adapter, (1) 6 ft Air Tube, (1) Certificate of Calibration

Temperature Rating	32 to 104 deg F
Airflow	13 cfm
Pressure Range	7 - 87 psi

Length	6.5  Inch
Width	5.4  Inch
Height	1  Inch

一般特征
标准ANSI / ESD S20.20，ESD TR53，OSHA批准
净重0.4磅
电气特性
额定电压100  -  240VAC（输入），24VDC（输出）
额定频率50/60 Hz
支持信息
包括（1）24VDC电源适配器，（1）6英尺空气管，（1）校准证书
技术细节
温度等级32至104华氏度
气流13 cfm
压力范围7  -  87 psi
物理特性
长度6.5英寸
宽度5.4英寸
高度1英寸

Features :

• Point-of-use compressed air (7 - 87 psi) ionizing blow off gun
• Neutralizes electrostatic charges to eliminate attraction, visual imperfections, and contamination issues by dislodging charged dust and debris
• Fast discharge times with +/- 15V offset voltage balance
• High frequency piezo AC with transformer inside of hand piece - consistent ionization performance with longer hose lengths (6 ft hose included) with no additional remote console or separate high voltage power supply required
• Balanced lightweight ergonomic design (less than 0.5 lb) - aligns the center gravity with the operator's gripping hand for ease of use by operators
• Long handle-trigger - reduces stress on operator's fingers
• Slotted nozzle tips
• Clean dry air (CDA) or nitrogen
• 10 ft power cable (100 - 240VAC) to 24VDC power adapter - use with multiple power sources by changing blades on the power adaptor
• Status LEDs - illuminate when the trigger is held down and to indicate that the gun is outputting ionized air
• Balance of +/- 15V
• Ozone of < 0.04 ppm
• 6 mm gas connection port
• Enclosure: Gun - PBT polymer, Nozzle - PPS polymer

特征 ：

使用点压缩空气（7  -  87 psi）电离吹扫枪
通过**带电的灰尘和碎屑，中和静电电荷，消除吸引力，视觉缺陷和污染问题
具有+/- 15V偏移电压平衡的快速放电时间
高频压电交流电源，手持式变压器内部 - 电磁性能一致，软管长度更长（包括6英尺软管），无需额外的远程控制台或单独的高压电源
平衡轻巧的人体工程学设计（小于0.5磅） - 将中心重力与操作员的抓握手对齐，便于操作员使用
长柄触发 - 减轻操作者手指的压力
开槽喷嘴头
清洁干燥空气（CDA）或氮气
10英尺电源线（100  -  240VAC）至24VDC电源适配器 - 通过更换电源适配器上的刀片，可与多个电源配合使用
状态LED  - 按住扳机时亮起，表示喷枪正在输出电离空气
平衡+/- 15V
臭氧<0.04 ppm
6毫米气体连接端口
外壳：枪 -  PBT聚合物，喷嘴 -  PPS聚合物