产品名称：PELCO® SynapTek GridStick™

PELCO^® SynapTek GridStick^™

staining and storage for EM

An inexpensive device to reduce or eliminate precipitate and dirt from your electron microscopy grids during staining.
The PELCO^® SynapTek GridStick™ is manufactured from a thin but rigid alloy that does not react with commonly used organic solvents and stains. The stick is 4mm wide by 75mm long and has a slot along its center with small undercut notches on one side to make grid removal simple.
A small area on top of each stick is reserved for identification (use a fine point permanent ink pen).
The PELCO^® SynapTek GridStick™ is coated with a specially formulated pressure-sensitive adhesive. This adhesive holds the grids in place during staining, emulsion coating, carbon coating, shadow casting and serial section collection.
The PELCO^® SynapTek GridStick™ will fit into conventional Pasteur pipettes. The grids lie in the same plane as the solution flow, minimizing chances of breaking Formvar films and collecting surface debris.
The PELCO^® SynapTek GridStick™ was developed in conjunction with PELCO^® SynapTek™ Grids. Other grids may be used provided they have sufficient thickness to avoid bending when being removed from the adhesive on the PELCO^® SynapTek GridStick™. PELCO^® SynapTek™ Grids are 100µm thick.

Note: Staining Pipettes are fire polished, heat annealed, acid cleaned, blow dried with filtered compressed air and capped.

Prod #	Description	Unit
155	PELCO® Synaptek GridStick™ Kit	each
SynapTek™ Replacement Components
155-5	PELCO® Synaptek GridSticks™ (uncoated)	pkg/10
155-7	Staining Pipettes with 2 flow limiting plugs	pkg/20