产品详情
查看大图

  • 产品名称：SynapTek网格

  • 产品型号：4510
  • 产品厂商：其它品牌
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
The PELCO® SynapTek™ grids are made of a special alloy (beryllium copper) which makes these grids extremely sturdy and gives perfect stability for coating with a support film. These grids are easy to
详情介绍：

PELCO® SynapTek™ Grids

The PELCO® SynapTek™ grids are made of a special alloy (beryllium copper) which makes these grids extremely sturdy and gives perfect stability for coating with a support film. These grids are easy to clean, contamination free and reusable after cleaning. The thickness of the PELCO® SynapTek™ grids is 100µm (4 mil), diameter is 3.05mm. Standard oval slot size is 1x2mm. The DOT type is also available with a slot size of 0.5x2mm. The gold plated PELCO® SynapTek™ grid (GILDED) has been developed for special applications like immunology research.

DOT: One side of the grid is marked with 2 dots for clear identification, visible to the naked eye.
NUM: A number stamped on the grid for identification. Numbers are in random order and may be duplicated.
NOTCH: An indentation stamped on one side of the grid to enable easy grasping by tweezers.
DOT
1 x 2mm slot  DOT
0.5 x 2mm slot  NUM
1 x 2mm slot  NOTCH
1 x 2mm slot  NOTCH-DOT
1 x 2mm slot  NOTCH-NUM
1 x 2mm slot GILDED
NOTCH-NUM
1 x 2mm slot

Prod # Description Unit
DOT (1 x 2mm slot)
4510
PELCO® SynapTek™ DOT Grids, 1 x 2mm slot, Beryllium-Copper
100/vial
DOT (0.5 x 2mm slot)
4511
PELCO® SynapTek™ DOT Grids, 0.5 x 2mm slot, Beryllium-Copper
100/vial
NUM (1 x 2mm slot)
4512
PELCO® SynapTek™ NUM Grids, 1 x 2mm slot, Beryllium-Copper
100/vial
NOTCH (1 x 2mm slot)
4514
PELCO® SynapTek™ NOTCH Grids, 1 x 2mm slot, Beryllium-Copper
100/vial
NOTCH-DOT (1 x 2mm slot)
4516
PELCO® SynapTek™ NOTCH-DOT Grids, 1 x 2mm slot, Beryllium-Copper
100/vial
NOTCH-NUM (1 x 2mm slot)
4518
PELCO® SynapTek™ NOTCH-NUM Grids, 1 x 2mm slot, Beryllium-Copper
100/vial
GILDED, NOTCH-NUM (1 x 2mm slot)
4506
PELCO® SynapTek™ GILDED NOTCH-NUM Grids, 1 x 2mm slot, Beryllium-Copper, Gold Plated
100/vial

PELCO® SynapTek GridStick™

staining and storage for EM

An inexpensive device to reduce or eliminate precipitate and dirt from your electron microscopy grids during staining.
The PELCO® SynapTek GridStick™ is manufactured from a thin but rigid alloy that does not react with commonly used organic solvents and stains. The stick is 4mm wide by 75mm long and has a slot along its center with small undercut notches on one side to make grid removal simple.
A small area on top of each stick is reserved for identification (use a fine point permanent ink pen).
The PELCO® SynapTek GridStick™ is coated with a specially formulated pressure-sensitive adhesive. This adhesive holds the grids in place during staining, emulsion coating, carbon coating, shadow casting and serial section collection.
The PELCO® SynapTek GridStick™ will fit into conventional Pasteur pipettes. The grids lie in the same plane as the solution flow, minimizing chances of breaking Formvar films and collecting surface debris.
The PELCO® SynapTek GridStick™ was developed in conjunction with PELCO® SynapTek™ Grids. Other grids may be used provided they have sufficient thickness to avoid bending when being removed from the adhesive on the PELCO® SynapTek GridStick™. PELCO® SynapTek™ Grids are 100µm thick.
Prod # Description Unit
155
PELCO® Synaptek GridStick™ Kit
each
SynapTek™ Replacement Components
155-5
PELCO® Synaptek GridSticks™ (uncoated)
pkg/10
155-7
Staining Pipettes with 2 flow limiting plugs
pkg/20

GridStick™ Adhesive
Prod # Description Unit
155-9
GridStick™ Adhesive, 5ml
each

沪公网安备 31010902002433号