产品名称：PELCO Tabs Carbon Conductive Tabs, Double Coated 双面碳导电胶垫

PELCO Tabs™ Carbon Conductive Tabs, Double Coated

双面碳导电胶垫 双面碳导电胶片 双面碳导电试片座 高纯碳导电胶片

与其他应用于扫描电镜固定样品的普通粘合剂相比，PELCO碳导电胶片操作的简易性、表面的平滑光洁都有了很明显的提高。胶垫的两面都具有厚的导电粘附层（内侧的导电层厚度35um，两面的粘附层厚度45um，加起来总厚度为125um【5密位】）并附有衬垫，分别为透明和白色。双面碳导电胶垫可以立即使用。顶部保护性的衬垫在准备好固定样品之前不需要去掉。避免了可能的污染。脱气可以忽略不计。

new types added
 

The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible.

Application of the tab to a mount or surface should be done slowly and carefully to maintain surface smoothness.

The conductive adhesive is a carbon filled acrylic, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol, alcohols or our 3M™ Adhesive Remover 80924 which is solvent-free. Temperature maximum is 60°C (140°F). Small impurities of Si, Sb, S and very small impurities of Fe, Mg and Na can be found.
This product may also be used for gunshot residue analysis.
Many laboratories use these tabs for SEM in a large diversity of applications. Refrigeration will increase shelf life but a warm up period of one hour is then required before use.
(Use Spectro Tabs where a purer composition is required.)