產品名稱：襯底，用於透射電子顯微鏡的支撐膜柵

Substrates, Support Film Grids
for Transmission Electron Microscopy

Lacey Support Films - NetMesh™ Grids:

A lacey network support film. The holes in the lacey support film vary in size from less than a quarter micron to more than 10 microns making them ideal for any type of specimen. Lacey support films are extremely strong and withstand vigorous specimen preparation treatment. The specimen material is supported by the film network but lies across or protrudes into the holes of the mesh. This allows high definition imaging without the effects of underlying support material. Lacey films can be used for specimens ranging from large crystals and other particulate material to virus particles. Smaller particles, such as viruses or bacteria, tend to adhere around the inner edges of the holes, an ideal situation for high resolution microscopy. Lacey films are also ideal for selected area electron diffraction imaging. We offer three types of lacey film:

(a) Lacey Formvar Stabilized with Carbon: A Lacey Formvar film with the lacey structure enforced by a heavy coating of carbon. Holes are completely open.

Prod #	Description	Unit
01881	Lacey Formvar/Carbon, 200 mesh, Copper	pkg/25
01881-F	Lacey Formvar/Carbon, 200 mesh, Copper approx. grid hole size: 97µm	pkg/50
01883	Lacey Formvar/Carbon, 300 mesh, Copper	pkg/25
01883-F	Lacey Formvar/Carbon, 300 mesh, Copper approx. grid hole size: 63µm	pkg/50

(b) Lacey Carbon Type-A: A Lacey carbon film with a removable Formvar backing on the opposite side of the grid. When the Formvar is removed, by dipping in solvent, the Lacey carbon film remains. These films are stable under all EM operating conditions and for use where the presence of Formvar can not be tolerated. Pure Lacey Carbon is more delicate than those with Formvar backing and require more careful handling during specimen preparation. Holes are completely open.

Prod #	Description	Unit
01890	Lacey Carbon Type-A, 300 mesh, Copper	pkg/25
01890-F	Lacey Carbon Type-A, 300 mesh, Copper approx. grid hole size: 63µm	pkg/50

(c) Lacey Formvar Stabilized with Silicon Monoxide: A Lacey formvar film with lacey structure enforced by a silicon monoxide coating. Holes are completely open.

Prod #	Description	Unit
01887-F	Lacey Formvar/Silicon Monoxide, 300 mesh, Copper, approx. grid hole size: 63µm	pkg/50

(d) Lacey Carbon Films with No Formvar: Holes are completely open

Prod #	Description	Unit
01895	Lacey Carbon, 300 mesh, Copper, approx. grid hole size: 63µm	pkg/25
01895-F	Lacey Carbon, 300 mesh, Copper, approx. grid hole size: 63µm	pkg/50