产品详情
查看大图

  • 产品名称：ProtoGel Quick-Cast 12% ProtoGel 速制蛋白凝胶（12%）

  • 产品型号：EC-895
  • 产品厂商：其它品牌
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
ProtoGel Quick-Cast 12% ProtoGelTM 速制蛋白凝胶（12%）
详情介绍：

 

ProtoGel Quick-Cast 12%

ProtoGelTM 液态预制蛋白凝胶（12%）


  • Cast a Gel in One Fourth the Time
     
  • Eliminates Mixing and Measuring
     
  • Ideal for Western Blotting Applications
     
  • Precast Convenience without the Precast Price


        Catalog Number:EC-895

  • 美国National Diagnosis 研制的12%液态预制蛋白凝胶是市场的**个也是唯壹的液态预制胶产品。

    1.一瓶液态预制胶搞定配胶，一次成型，不需两次倒胶

    2.为蛋白印迹实验节省时间，同时提高实验重复性

    3.非预制的价格提供预制的便捷

    4.稳定性好，4度保质期达两年

    12%预制蛋白凝胶溶液可以使制胶时间从2小时缩短至25分钟, 使制胶步骤减少并缩短制胶的时间。只需要简单的量取所需的体积, 加入起始剂，及可倒胶。一次成型， 不需要多步的量取和混合,也不需要在之后制备浓缩胶. 电泳缓冲液和蛋白染色均与普通的蛋白凝胶电泳相同.密闭避光可在4摄氏度保存2年.

     

    With the introduction of ProtoGel Quick-Cast, the time required for casting gels for protein separation has been reduced from 2 hours to under 25 minutes, and the number of steps involved has been cut from 10 to only 3. With ProtoGel Quick-Cast, simply measure out the amount needed, add initiators and cast the gel. No mixing, no multiple measurements, no need for a second casting to produce a stacking gel.

    ProtoGel Quick-Cast gels are run in standard 1X Tris-Glycine SDS. Electrical parameters will vary from apparatus to apparatus, but typically gels are run at 170V for 60 minutes.

    ProtoGel Quick-Cast gels require no special handling after the run.Simply stain according to standard protocols.

    Storage: ProtoGel Quick-Cast is stable for 24 months when stored tightly capped in the refrigerator (40C).


沪公网安备 31010902002433号