产品名称：卡尺和千分尺

Prod #	Description	Unit

54490

Ultra-Cal IV Electronic Digital Caliper; inch/ metric; 6"/152mm

each

54489

Ultra-Cal IV Electronic Digital Caliper; inch/ metric; 8"/203mm

each

54490-1

Computer Connector Kit, Includes: 80" connecting cable with 9 pin IBM compatible, 9/25 pin adapter, supporting disk and instruction manual

1 kit

54490-2

Certificate for Ultra-Cal IV Electronic Digital Caliper #54490, 6"/152mm(supplied with purchase only)

each

54489-2

Certificate for Ultra-Cal IV Electronic Digital Caliper #54489, 8"/203mm(supplied with purchase only)

each

Pro-Max:
The Computerized Caliper

A fast, accurate, easy to use caliper with exceptional user features. Large LCD display shows inch (to 0.0005") and metric (to 0.01mm) as well as peak mode and data output mode status. Set tolerances at upper and lower limit and read automatically. Floating zero for easy comparative measurements. Body is hardened stainless steel; jaws measure outside, inside, depth and "step" work. Complete with batteries & case.
NIST Traceable Certificate available at extra cost.

Prod #	Description	Unit

54496

Pro-Max Caliper, 6" (152mm)

each

54494

Pro-Max Caliper, 8" (203mm)

each

54495

Replacement batteries (two required), pkg/2

each

54496-2

Certificate for Pro-Max Caliper, 6" (152mm), (supplied with purchase only)

each

54494-2

Certificate for Pro-Max Caliper, 8" (203mm) (supplied with purchase only)

each

54490-1

Computer Connector Kit, Includes: 80" connecting cable with 9 pin IBM compatible, 9/25 pin adapter, supporting disk and instruction manual

1 kit

Digital, Carbon Fiber Caliper, Certified

Designed for the lab
Switch from inches to millimeters at the touch of a button. Great for use in measuring scratch or damage sensitive materials. Will not corrode when used on tissue or other wet materials. This caliper will measure up to 6" (152mm).
The graduated scale on the caliper body is for approximate reference only. The exact measurement (accurate to ±0.1mm/0.01") is shown on the LCD display.

Zeroes at any point
Zero button instantly sets unit to zero when jaws are at any position. This permits setting a Floating Zero™ or reference point to read “greater than or less than results with a minus sign displayed” without calculations. Ergonomic design, precision calipers are ideal for measuring outside or inside diameter. Easy to read, large digital display is 1/3" (8.5mm) high.

Traceable to NIST for accuracy
No lubrication is ever required on the ultra-smooth slide bar. Runs on the supplied battery for 10,000 hours. Made of strong composite carbon fiber. To assure accuracy an individually serial-numbered Certificate is provided from an ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).

Prod #	Description	Unit

54491

Digital Carbon Fiber Calipers with certificate, 6" (152mm)

each

Digital MicrometerClear, easy-to-read numbers on a digital counter; every fifth millimeter (and thousandth) is numbered on the thimble. Including wrench and fitted case.Metric - 0 to 25mm, 0.001mm graduation

Prod #	Description	Unit

54492

Digital Micrometer, Metric Scale

each

Vernier Caliper

Metric and inch, graduations 0.05mm and 0.001 inch. Hardened, tempered stainless steel, satin chrome finish. Jaws designed for inside, outside and thread measurements. Thumb lock slide. Depth of jaws: 1.6" (40.6mm). Range: 6" (152mm).

Prod #	Description	Unit

54488

Vernier Caliper, Metric & Inch, 6" (152mm)

each