产品详情
  • 产品名称:PELCO easiGlow™ Glow Discharge Cleaning System

  • 产品型号:91000
  • 产品厂商:其它品牌
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
For one of the most common glow discharge applications, making TEM support films or grids hydrophilic using air, the PELCO easiGlow™ uses an automated and quick cycle with fully selectable parameters.
详情介绍:
The PELCO easiGlow™ Glow Discharge Cleaning System is a compact, quick and easy to use standalone system. It is primarily designed for hydrophilization of TEM carbon support films, which have the tendency to be hydrophobic. A glow discharge treatment with air will make a carbon film surface negatively charged (hydrophilic) which allows aqueous solution to spread easily.

With increasingly demanding imaging applications, using clean and consistent quality TEM grids and supports has become more important than ever. The PELCO easiGlow™ is an affordable and easy to operate glow discharge system for any TEM lab.

The practical chamber size with its newly designed glow discharge head and adjustable stage with glass slide holder allows for easy loading and fast turnaround times. The system is fully microprocessor controlled and includes an intelligent touch screen device for control and display of operation parameters. The PELCO easiGlow™ supports both hydrophilic and hydrophobic treatment with either negative or positive charge and includes two separately controlled gas inlets. The required vacuum level is set by an electronically controlled precision proportional valve. This novel approach eliminates manual setting with a needle valve. A gentle venting procedure ensures that the TEM grids are not disturbed when the system is vented.
Glow Discharge Methods supported:
Surface Condition  Charge  Atmosphere 
Hydrophilic Negative Air
Hydrophilic Positive Air (with subsequent magnesium Acetate treatment)
Hydrophobic Positive Alkylamine
Hydrophobic Negative Methanol

For those labs which need both hydrophilic and hydrophobic surface treatments on a regular base, a dual glow discharge system is available to avoid cross contamination of the glow discharge chambers. Hydrophobic surfaces are preferable when organic solvents are used.
Since the optimized vacuum level for glow discharge procedures is in the range of 0.45 to 1.1 mbar, we offer the affordable GD7 dual stage rotary vacuum pump designed for this pressure range.

Advantages of the PELCO easiGlow™ system:
•Precise and easy vacuum setting
•Short cycle times
•Consistent results
•Auto, programmed and manual mode
•Intuitive touch screen for display and operation
•Supports hydrophilic/hydrophobic and negative/positive modes
•Affordable, compact, standalone system
•L-Gasket protects glass jar at base
GD7 Rotary Vacuum Specifications
Pumping speed 8.4m3/hr, 140 l/min, 5 CFM @ 60Hz
7.0m3/hr, 117 l/min, 4.2 CFM @ 50Hz
Ultimate vacuum 7 x 10-3 MBAR
(5 x 10-3 TORR, 5 Micron)
Vacuum connection KF16
Exhaust connection Compatible with 1/4" NPT Thread
Oil capacity 500cc
Operating temperature 7 - 40°C (45 - 104°F)
Dimensions 380 x 150 x 320mm
15" x 6" x 12.5" (H x W x L)
Weight 14kg / 33.5 lbs.
Power rating 110 - 115V 60 Hz, 7.0A
220 - 250V, 50/60 Hz, 4.3A  
 
Prod # Description Unit
91000
PELCO easiGlow™ Glow Discharge Unit
each
91002
Dual Chamber PELCO easiGlow™ Glow Discharge Unit
each
91020
GD7 Vacuum System, 8.4m³/hr incl. Connection Kit, 115V, 60Hz
each
91020-230
GD7 Vacuum System, 7m³/hr incl. Connection Kit, 230V, 50/60Hz
each
91022
GD7 Vacuum System, 8.4m³/hr incl. Dual vacuum Connection Kit For Dual Chamber Glow Discharge System, 115V
each
91022-230
GD7 Vacuum System, 7m³/hr incl. Dual vacuum Connection Kit For Dual Chamber Glow Discharge System, 230V
each
91050
Replacement Glass Chamber with sealed top plate
each
91000-2
Replacement Touch Screen Stylus
each
91051
O-ring for Glow Discharge Chamber
pk/2
91053
91050 Protective L-gasket, use with O-ring
each
91010-16
PELCO easiGlow™ Vacuum Connection Kit to KF16 Pump inlet
each
91010-25
PELCO easiGlow™ Vacuum Connection Kit to KF25 Pump inlet
each
91010-30
Dual Vacuum Connection Kit for Dual Chamber Glow Discharge System to KF 16 pump inlet
each
9609
Exhaust filter for GD7 or #7010 Rotary Vacuum Pump
each
891-35
Ultragrade 19 Rotary Pump Oil for GD7, 1 ltr
each

 

91000
PELCO easiGlow™ Glow Discharge Unit
each

 

91000
PELCO easiGlow™ Glow Discharge Unit
each

沪公网安备 31010902002433号