SEM Mounts with Engraved Division

A selection of the most common SEM mounts for all standard SEMs with engraved and numbered divisions to accommodate multiple smaller samples. The clearly numbered divisions also allow for easy locating of the mounted samples. Mounting multiple samples inside the clearly labeled divisions is a space saving alternative compared to mounting single samples on single mounts. Quality machined, smooth surface.
Pin stub versions of the engraved mounts are available in diameters 12.7, 18, 25, and 38mm and can be used with all SEMs using pin stubs: FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan. The cylinder mount versions for JEOL SEMs are available in 12.5, 25 and 32mm. The cylinder mounts for Hitachi, with M4 thread, are available in 15, 25 and 32mm. Sold as each and pack/10.
SEM pin mounts with engraved and numbered divisions for
FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan SEMs.
Pin is 3.2mm (1/8") and 9mm (3/8") long.

Prod #	Description	Unit

16360

Ø12.7mm pin mount with 3 divisions

each

16363

Ø18mm pin mount with 3 divisions

each

16364

Ø25mm pin mount with 9 divisions

each

16367

Ø38mm pin mount with 12 divisions

each

16366

Ø25 x 8mm cylinder mount with 9 divisions

each

16369

Ø32 x 10mm cylinder mount with 12 divisions

each

16361

Ø15 x 6mm x M4 cylinder mount with 3 divisions

each

16365

Ø25 x 6mm x M4 cylinder mount with 9 divisions

each

16368

Ø32 x 6mm x M4 cylinder mount with 12 divisions

each