Two Part Conductive Silver Paint 两组分导电银胶 12642-14 桑戈国际贸易（上海）有限公司

产品详情

查看大图

你添加了1件商品查看购物车

简单介绍：

广泛应用在导电器件的无焊连接，比如电镜室的样本粘接，电子模型设计、电路板修复、表面导电连接、放电、屏蔽和接地等方面。室温凝固时间大约为10分钟。

详情介绍：

Two Part Conductive Silver Paint

两组分导电银胶

12642-14

Two Part Conductive Silver Paint

14g

Composite Properties:

Material	Electrically conductive silver epoxy
Thinner	Do not thin
Color/Material	Part A: Bright silver epoxy Part B: Gray silver hardener

Cured Properties:

Use Procedures:

Mix Ratio & Application	Mix equal amounts (1:1) by weight or volume. Non-critical. Mix thoroughly and apply to clean surface within 10 minutes.
Cure:	Curing times and overall conductivity depend primarily on temperature. For fastest curing times, maximum conductivity and adhesion, heat the bond to between 150-250°F (65-121°C) for 5-10 minutes and allow to cool Room temperature curing is possible in four hours at above 75°F(24°C). For heating use a heat gun, hair dryer or oven. Curing at room temperature below 75°F(24°C) will result in longer curing times and increased overall cured resistance. Maximum properties are achieved in twenty four hours.
Pot life	10 minutes @ 75°F (24°C). Apply within 10 minutes of mixing.
Clean Up	Use a solvent before materials is fully cured.
Shelf Life	Twelve months unmixed and unopened.

产品咨询

姓名：

电话：

您的需求：

产品名称：Two Part Conductive Silver Paint 两组分导电银胶