产品名称：Hamilton进样器选型指导

固定针头，针头固定在玻璃内，基部与零刻度位置对齐
For low volume syringes The needles are cemented into the glass syringe barrel at a point corresponding to the zero graduation mark. With this termination, dead volume is limited to the internal volume of the needle. Not autoclavable. Needle gauge is determined by the syringe volume and are not user-selectable.

SN, Special Cemented Needle

For low volume syringes The special needle terminations are the same as the Cemented Needle terminations except they allow for a variety of user-defined gauges, lengths, and point styles to be attached.

          LTN, Luer Tip Cemented Needle

针头被粘合在玻璃内，基部与零刻度位置对齐

 For mid volume syringes The needles are cemented into the glass  syringe barrel at a point corresponding to the zero graduation mark. With this termination, dead volume is limited to the internal volume of the needle. Not autoclavable. Needle gauge is determined by the syringe volume and are not user-selectable

LTSN, Luer Tip Special Cemented Needle

For mid volume syringes The special needle terminations are the same as the Luer Tip Cemented Needle terminations except they allow for a variety of user-defined gauges, lengths, and point styles to be attached.

LT, Luer Tip

突出的Tip头可以接皮下注射针头、Kel-F hub针头以及其他连接装置。
The needles are removable and fit over a ground glass hub which is tapered in the shape of a male luer. The LT termination will accept most hypodermic needles but was designed specifically for use with Hamilton Kel-F needles. This termination increases the dead volume in the syringe, which may not be appropriate for some applications. Autoclavable when disassembled.

RN, Removable Needle

可换针头底座螺母使针头基部与零刻度对齐,高温高压下读数将产生偏差，可换成其他型号的同种规格尺寸的针头。
The needles are removable and are a Hamilton-specific design. The design allows the needles to seat precisely at the zero graduation mark of the syringe. Users can select the needle gauge, length, and point style to optimize the syringe for custom applications. Additionally, this termination allows for a removable needle without increasing the dead volume of the syringe and is ideal when there is a risk of the needle clogging. Autoclavable when disassembled. Repeated autoclaving will shorten syringe life.

KH, Knurled Hub

可换针头，专用于7000系列注射器，高温高压下读数将产生偏差，进样时*高承受6000psi的压力，前端的附加套件可以使每次进样的深度保持一致
The knurled hub is used exclusively on 7000 Series syringes. The hub handles up to 6000 psig maximum injection pressure. The needle is removable but with a limited number of gauges available because the plunger is fitted inside the needle. Autoclavable when disassembled. Repeated autoclaving will shorten syringe life.

TLL, PTFE® Luer Lock

镀镍的黄酮Luer锁，不能高温**。用于Hamilton公司稀释配液仪和众多生化仪。
This termination has a PTFE, male Luer taper with nickelplated brass locking hub for use with Kel-F needles, metal hub needles, and universal connectors. Also, the TLL is used with Hamilton diluters/dispensers, OEM applications, and manual operations. Autoclavable when disassembled, except on 25 mL and greater syringes. Repeated autoclaving will shorten syringe life.

SL, SampleLock™

可换针头配以样品锁，能在高温高压下使用，用于顶空、环境样品的采集与储存，常态下气体样品的GC分析。
The sample lock incorporates an On/Off syringe valve with RN needle. This termination is used for headspace, environmental sample collection and storage, pre-pressurization of gaseous samples for GC analysis, and sample spiking. Not autoclavable.

    CA,Carbon Analyzer