产品名称：Tissue Culture Nosepiece 组织培养鼻架

Tissue Culture Nosepiece组织培养鼻架

• The Drummond Tissue Culture Nosepiece eliminates the possibility of cross-contamination due to over-pipetting. It incorporates a dual hydrophilic 0.8 µm, hydrophobic 0.8 µm filter which prevents further use once contaminated by fluid. This double membrane filter provides a barrier to particles as small as 0.1 µm. Each kit contains all necessary parts including four filters.
• Extra filters may be ordered separately
• The Tissue Culture Nosepiece has been certified to meet or exceed USP Class VI - 121° plastics tests for biosafety.

Why Use a Drummond Self-Locking Filter in Your Pipet-Aid?
In order to provide a fail-safe, one-time check valve for Pipet-Aid pipettors, Drummond pioneered the use of a “self-locking” dual layer filter composed of one hydrophobic membrane and one hydrophilic membrane located in the nosepiece. With a dual layer membrane, when the filter is challenged with an aqueous solution, the hydrophobic layer prevents liquid from entering the handle and the wetted hydrophilic layer restricts the flow of air which locks the Pipet-Aid from further use. When this happens, the user must replace the filter and clean the other wetted parts, thus protecting the Pipet-Aid as well as the integrity of subsequent dispensings.

The specifications for the Drummond filter are .8 µm for the hydrophilic layer and .8 µm for the hydrophobic layer. Most competitive pipetting units use a single layer hydrophobic membrane filter with ratings of either .22 µm and .8 µm. These filters protect the handle only. If challenged with an aqueous solution, the filter will prevent the liquid from entering the handle; however, it can be subsequently blown out and pipetting can be continued. This action creates an aerosol generator just above the pipet and all subsequent dispensings are at risk of being contaminated. While the user may think he or she is sterilizing the air entering the pipet, they are in fact introducing contamination.

The most effective safety measure to prevent contamination is the cotton or fiber plug in each pipet. Even if a sterile filter is installed in a Pipet-Aid, the first time an aerosol comes in contact with the bottom membrane, the filter is rendered forever non-sterile. The only thing that prevents this from happening is the plug in the pipet itself which prevents aerosols from leaving the pipet and prevents them from entering. Drummond "self-locking" filters are supplied nonsterile because we believe there is no effective and practical method to maintain sterility in these devices.

Filter Specs	25 mm Pipette Filter
Lot:	9
Housing:	Modified Acrylic
Membrane:	Hydrophilic & Hydrophobic
Pore Size:	0.8/0.8µm