产品详情
查看大图

  • 产品名称：可互换的模块化SEM样品架

  • 产品型号：15372
  • 产品厂商：其它品牌
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
This extensive line of specimen holders all have a female M4 thread and are compatible with all of our modular SEM Stage Adapters. If used with the Jeol or ZEISS/LEO dovetail stage adapter one of the
详情介绍：

Single Flat Sample Clip Holder

This specimen holder is made of aluminum with spring-loaded clamping and grounding pin. Accommodates a sample thickness up to 3mm. Pin provides minimal surface clamping area and grounding on the imaged surface.
Prod # Description Unit
15375-2
Single flat sample clip holder, M4
each

 Triple Flat Sample Clip HolderThis specimen holder is made from aluminum with spring-loaded clamping and grounding pin. Accommodates three samples with thickness up to 3mm. The pins provide minimal surface clamping area and grounding on the imaged surface.
Prod # Description Unit
15376-2
Triple Flat Sample Clip Holder, M4
each

45° Cross Section Holder

This Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 45° angle.  Clip width is 6.35mm. Accommodates a sample thickness up to 11mm. The clip provides minimal surface clamping area and grounding on the imaged surface.
Prod # Description Unit
15460
45° Cross Section Holder, M4
each

Triple 45° Cross Section Holder

The Triple Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 45° angle.  Clip width is 6.35mm. Accommodates three samples with a thickness up to 11mm. The clips provide minimal surface clamping area and grounding on the imaged surface.
Prod # Description Unit
15461
Triple 45° Cross Section Holder, M4
each

70° Cross Section Holder

This Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 70° angle.  Clip width is 6.35mm. Accommodates a sample thickness up to 11mm. The clip provides minimal surface clamping area and grounding on the imaged surface.
Prod # Description Unit
15377-2
70° Cross Section Holder, M4
each

Triple 70° Cross Section HolderThe Triple Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 70° angle.  Clip width is 6.35mm. Accommodates three samples with a thickness up to 11mm. The clips provide minimal surface clamping area and grounding on the imaged surface.
Prod # Description Unit
15379-2
Triple 70° Cross Section Holder, M4
each

90° Cross Section HolderThis Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 90° angle.  Clip width is 6.35mm. Accommodates a sample thickness up to 11mm. The clip provides minimal surface clamping area and grounding on the imaged surface.
Prod # Description Unit
15378-2
90° Cross Section Holder, M4
each

Triple 90° Cross Section HolderThe Triple Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 90° angle. Clip width is 6.35mm. Accommodates a sample thickness up to 11mm. The clips provide minimal surface clamping area and grounding on the imaged surface.
Prod # Description Unit
15380-2
Triple 90° Cross Section Holder, M4
each

Cross Section HolderThis specimen holder holds thin or flat samples up 6.35mm (1/4"). Adjustable angle from 0-180°.
Prod # Description Unit
15325-4
Cross Section Holder, M4
each

Adjustable Profile HolderDesigned to adjust the exact viewing angle for cross section made from wafers or other thin specimens up to a thickness of 3.2mm (1/8"). Angle adjustment range 0-90°. Made of aluminum with stainless steel allen screw. Allen wrench included.
Prod # Description Unit
15356-4
Adjustable Profile Holder, M4
each

Compact Variable Tilt MountThis Compact Variable Tilt Specimen Mount allows for easy mounting and tilting small samples from 0° – 90° and SEM investigation with small working distances. Markings for 30°, 45°, 70° and 90°.  Table size is 11 x 11mm (0.46" x0.46"). Overall size is 14 x14 x12.7mm (0.55x0.55x0.5”). Made of aluminum with stainless steel screw.
Prod # Description Unit
15438
Compact Variable Tilt Mount, M4
each

Variable Tilt Specimen Holder forPinMountsAccommodates specimens pin stubs up to 18mm (.7") diameter or with a size up to 26 x 20mm. Tilts 0 - 90° with 10° markings. Additional markings for 30°, 45°, and 70°. Tilt table size is 26 x 20mm, overall size is 33 x 20 x 19mm H. Made of aluminum with stainless steel screws. Allen wrench included.
Prod # Description Unit
15450-4
Variable Tilt Specimen Holder, M4
each

Variable Tilt Specimen Holder for Hitachi M4 MountsAccommodates Hitachi 15mm cylinder mount with M4 thread. Tilts 0 - 90° with 10° markings. Additional markings for 30°, 45°, and 70°. Tilt table size is 26 x 20mm, overall size is 33 x 20 x 19mm H. Made of aluminum with stainless steel screws. Allen wrench included.
Prod # Description Unit
15451-4
Variable Tilt Specimen Holder for Hitachi M4 mounts, M4
each

沪公网安备 31010902002433号